TECHNICAL DATA SHEET
Improving latex offering waterproofing, adhesion and elasticity
Fields of application
Renderings, traditional mortar plasters, reducing the use of lime.Reinforces floor cement screeds and slopes. Suitable for leveling,grooves, joint-fillings and tiles adhesion. It can also be used as aprimer (1 part Novobond + ¼ part of cement or cementitious with fine-grained inert) in either case of waterproofing horizontal or vertical surfaces, or improving adhesion. At the above proportion, can stabilize and waterproof concrete, pillars, walls, terraces, balconies.
Properties-advantages
The admixture of Novobond :
- Offers waterproofing, elasticity and adhesion to various kinds of building surfaces.
- Prevents cracking, by decreasing shrinkage during cement hardening.
- Decreases water to cement ratio, improving the workability and plasticity of mortar allowing at the same time the creation of thin coats.
- Enhances abrasion and ageing resistance, thus producing non-dusting coats.
- Enhances durability against frost, increases flexion and tensile strength.
- Water-based friendly to the environment.
Technical characteristics
- Composition: Copolymer latex
- Color: White
- Density: 1
- Ph: 9 + 1
- Proportion: 2 – 10kg per 50kg of cement, depending on usage and the expected outcome of mortar improvement.
Instructions for use
Surface preparation: The substrate or the surface upon which Novobond will be applied must be clean, free from dust or any poorly adhering material and have sufficient mechanical resistance. The surface must also be moistened.